Configuring DHCP/NAT with Mesh Options

To configure DHCP/NAT with mesh option:

  1. Enable Mesh Option in zone level. Refer to Mesh Options in Creating an AP Zone.
  2. From the Access Points Page, select the AP to be assigned as the Root AP > Click the Configure button > select Mesh specific options > and select Root AP mode.
  3. Multiple address pools can be created and assigned to APs that are running DHCP services. Refer, Creating an AP DHCP Pool.
  4. From the Services & Profiles page, enable DHCP on the zone. Edit the DHCP Service on the AP by selecting the required VLANs and APs as Gateway APs. Refer, Configuring AP-based DHCP Service Settings.
Parent topic: DHCP/NAT