Limiting the AP count for a Zone in a Partner Domain

Super Admin of the partner domain have the privilege to configure the zones in that domain.

1. Create a super admin account for the partner domain. Refer, Creating Administrator Accounts.
2. NOTE

   While creating user groups, in step 4 (I) c, for Permission, select Super Admin from the drop-down.
   Create a user group and configure the access permissions, resources and administrator account. Refer, Creating User Groups.
3. Log on to the controller web interface using the following logon details:
   • User Name:

     Account Name@Domain

     The Account Name that you set when you created the Administrator Account and the Domain for which you created the Administrator Account. For example: If the partner domain is TestDomain and the Account Name is User, then the User Name is

     User@TestDomain

   • Password : The password that you set when you created the Administrator Account.
4. Follow the procedure to limit the number of APs for a zone in a partner-domain:
   1. Go to System > AP Settings > AP Number Allocation.
   2. Select the Enable AP Number Allocation check box and click OK. The Settings bar appears.
   3. From the left pane, in the system tree hierarchy, select the partner-managed zone for which you want to set the AP number limit.
   4. On the right pane, perform one of the following procedure:
      • Select Share Mode
      • Enter Number Limit
   5. Click OK.
   You have set the AP number limit for the selected partner-domain Zone.