SNMPv3

If your network uses SNMPv3:

  1. Go to Admin & Services > Administer > Network Management.
  2. On the SNMPv3 Agent tab, select the Enable SNMPv3 Agent check box.
  3. Enter the following information for both the Read Only and Read-Write privileges:
    • User: Enter a user name between 1 and 31 characters.
    • Authentication: Choose MD5 or SHA authentication method (default is MD5).
    • MD5: Message-Digest algorithm 5, message hash function with 128-bit output.
    • SHA: Secure Hash Algorithm, message hash function with 160-bit output.
    • Auth Pass Phrase: Enter a passphrase between 8 and 32 characters in length.
    • Privacy: Choose DES, AES or None.
    • DES: Data Encryption Standard, data block cipher.
    • AES: Advanced Encryption Standard, data block cipher.
    • None: No Privacy passphrase is required.
    • Privacy Phrase: If either DES or AES is selected, enter a Privacy phrase between 8 and 32 characters in length.
  4. Click Apply to save your changes.

SNMPv3 Agent