Disabling Cluster Redundancy - Active-Active mode from a Current Target Active Cluster

You can disable a current target cluster in an active-active cluster redundancy mode. To do so, perform these steps:
  1. Go to System > Cluster. The Cluster page appears.
  2. Select the cluster, scroll down and click the Configuration tab.
  3. On the right side of the Configuration area, click Configure. The Edit Cluster page appears.
  4. In the Cluster Redundancy area, click the Enable Cluster Redundancy option to switch off the option.
  5. Click OK. You have disabled cluster redundancy form the current target active cluster.
Parent topic: Cluster Redundancy