Configuring NAT Pool Setting
- Go to Services & Profiles > DHCP & NAT > NAT Profiles (DP).
- Select the NAT profile from the list and click the Pools tab.
- Click Create, the Create Pool Configuration page appears.
-
Configure the following:
- General Options
-
Pool Name: Type a name for the NAT pool settings that you want to create.
-
Description: Type a description for the pool settings that you want to create.
-
-
Policy Options
-
Private VLAN Range: Type the VLAN range and click Add. Range: 1 through 4095. For example: 1 or 1-2.
-
Private QinQ VLAN Range: Type SVLAN range, CVLAN range and click Add. Range: 2 through 4095. For example: 2 or 2-3.
-
-
Translation Options
-
Port Range: Type the port range. Range: 10000 through 65534. For example: 10000-20000.
-
Public Address Range: Type the public address range.
Note: This public address must not be duplicated with the other public address in the same subnet, which includes applied NAT Profile and vSZ-D's Access and Core Interface Address.
-
- General Options
- Click OK. You have created a NAT pool setting.