Disabling Cluster Redundancy - Active-Standby from the Active Cluster

To disable the cluster redundancy from the active standby cluster when the active cluster is in-service, perform these steps.
  1. Go to System > Cluster. The Cluster page appears.
  2. Select the cluster, scroll down and click the Configuration tab.
  3. On the right side of the Configuration area, click Configure. The Edit Cluster page appears.
  4. In the Cluster Redundancy area, click the Enable Cluster Redundancy option, if this option is enabled and the button appears blue in color.
  5. Click OK.
You have disabled cluster redundancy from active cluster when the active cluster is in Service.

If the active cluster is out-of-service, use the Disabling Cluster Redundancy - Active-Standby from the Standby Cluster task.

Parent topic: Cluster Redundancy