Configuring DHCP to Provide SmartZone IP Addresses to an ICX Switch
The following example shows how a DHCP server can be configured to send SmartZone IP addresses to ICX devices using DHCP Option 43.
Configure DHCP Option 43 on the DHCP server, using
RKUS.scg-address to identify the SmartZone IP addresses.
A single SmartZone IP address or a comma-separated list can be configured. SmartZone IP addresses are sent with a sub-option value of 6. The ICX device ignores all other data in DHCP Option 43 if SmartZone IP addresses are present.
The following example shows a DHCP Option 43 configuration on a DHCP server. The IP addresses listed are examples only.
subnet 192.168.12.0 netmask 255.255.255.0 {
range 192.168.12.100 192.168.12.199;
option routers 192.168.12.1;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.12.255;
option ntp-servers 192.168.11.22;
class "Ruckus AP" {
match if option vendor-class-identifier = "Ruckus CPE";
option vendor-class-identifier "Ruckus CPE";
default-lease-time 86400;
vendor-option-space RKUS;
option RKUS.scg-address "192.168.11.200, 192.168.11.201, 192.168.11.202";
}
}