Configuring NAT Global Settings

To create a NAT global setting:
  1. Go to Services & Profiles > DHCP & NAT > NAT Profiles (DP).
  2. Click Create, the Create NAT Profile page appears.
  3. Configure the following:
    • Profile Name: Type a name for the NAT profile that you want to create. AP supports 32 bytes.

    • Description: Type a description for the profile that you want to create.

    • Subnet: Type the IP address.

    • Prefix: Type a prefix value. Maximum range: 31.

    • Public VLAN: Type the VLAN range. Range: 2 through 4095.

    • Gateway: Type the gateway IP address.

  4. Click OK. You have created a NAT Profile.
Parent topic: Creating Profile-based NAT