Configuring DHCP Pool Settings

Go to Services & Profiles > DHCP & NAT > DHCP Profiles (DP).

Select the DHCP prolife from the list for which you want to configure the pool settings.

Select the Pools tab page.

Click Create and configure the following:

General Options
- Pool Name: Type a name for the pool configuration.
- Description: Type a description for the pool configuration.
Policy Options
- VLAN Range: Type the VLAN range. Range: 1, 2 through 4095. For example: 1, 2 or 2-3.
- QinQ VLAN: Select the check box and update the following:
  - QinQ SVLAN Range: Type a SVLAN range. Range: 2 through 4095.
  - QinQ CVLAN Range: Type a CVLAN range. Range: 2 through 4095.
Assigning Options
- Subnet: Type the IP address.
- Subnet Mask: Type the network address.
- Broadcast Address: Type the broadcast IP address.
- Pool Range: Type the address range for the pool.
- Exclude Pool: Type the address range that must be excluded.
- Primary Gateway: Type the primary gateway IP address.
- Secondary Gateway: Type the secondary gateway IP address.
- Primary DNS Server: Type the IP address of the primary DNS server.
- Secondary DNS Server: Type the IP address of the secondary DNS server.
- Domain Name: Type the domain name.
- Host Name: Type the host name.
- Lease Time: Type the duration in Hours, Minutes and Seconds. Range: 1 through 86400 seconds.
Option43 Value
- Click Create, the Create Option43 value form appears. Configure the following:
  - Choose the Space Name or click Create to configure Option 43 Space Name.
  - Enter a Description.
- Click OK, you have configured Option43 value.

Click OK. You have created DHCP pool configuration.