Configuring Switch AAA Servers

To add and manage AAA servers that the controller can use to authenticate users, complete the following steps.

  1. Select Administration > Admins and Roles > AAA.
  2. From Switch AAA Servers, click Create. The Create AAA Server page is displayed.
    Figure 215  Creating a Switch AAA Server

  3. Enter the AAA server name.
  4. For Type, select the type of AAA server to authenticate users:
    • RADIUS
    • TACACS+
    • Local User
  5. Enter the following information:
    • IP Address: Enter the IP address of the AAA server.
    • Auth Port: Enter the authentication port that the server is using.
    • Acct Port: Enter the accounting port that the server is using.
    • Shared Secret: Enter the shared secret.
    • Confirm Shared Secret: Re-enter the shared secret to confirm.
  6. Click OK.
NOTE
You can also edit or delete the server by selecting the options Configure or Delete from the Administrator tab.
NOTE
ICX switch fails to delete the TACACS+ and Radius AAA servers when pushed from the SZ or vSZ if SNMP query is disabled in the switch or if this is a pre-configured switch before joining SZ or vSZ.
Parent topic: Working with AAA Servers