Configuring NAT Pool Setting

To configure NAT pool settings
  1. Go to Services & Profiles > DHCP & NAT > NAT Profiles (DP).
  2. Select the NAT profile from the list and click the Pools tab.
  3. Click Create, the Create Pool Configuration page appears.
  4. Configure the following:
    • General Options

      • Pool Name: Type a name for the NAT pool settings that you want to create.

      • Description: Type a description for the pool settings that you want to create.

    • Policy Options

      • Private VLAN Range: Type the VLAN range and click Add. Range: 1 through 4095. For example: 1 or 1-2.

      • Private QinQ VLAN Range: Type SVLAN range, CVLAN range and click Add. Range: 2 through 4095. For example: 2 or 2-3.

    • Translation Options

      • Port Range: Type the port range. Range: 10000 through 65534. For example: 10000-20000.

      • Public Address Range: Type the public address range.

        Note: This public address must not be duplicated with the other public address in the same subnet, which includes applied NAT Profile and vSZ-D's Access and Core Interface Address.

  5. Click OK. You have created a NAT pool setting.
Parent topic: Creating Profile-based NAT