Displaying RADIUS configuration information
The show aaa command displays information about all TACACS/TACACS+ and RADIUS servers identified on the device.
device#show aaa
Tacacs+ key: foundry
Tacacs+ retries: 1
Tacacs+ timeout: 15 seconds
Tacacs+ Server: 10.95.6.90 Port:49:
opens=6 closes=3 timeouts=3 errors=0
packets in=4 packets out=4
no connection
Radius key: networks
Radius retries: 3
Radius timeout: 3 seconds
Radius Server: 10.95.6.90 Auth Port=1812 Acct Port=1813:
opens=2 closes=1 timeouts=1 errors=0
packets in=1 packets out=4
no connection
The following table describes the RADIUS information displayed by the show aaa command.
Field |
Description |
---|---|
Radius default key |
The setting configured with the radius-server key command. At the Super User privilege level, the actual text of the key is displayed. At the other privilege levels, a string of periods (....) is displayed instead of the text. |
Radius retries |
The setting configured with the radius-server retransmit command. |
Radius timeout |
The setting configured with the radius-server timeout command. |
Radius Server |
For each RADIUS server, the IP address, and the following statistics are displayed: Auth Port RADIUS authentication port number (default 1812) Acct Port RADIUS accounting port number (default 1813)
|
connection |
The current connection status. This can be "no connection" or "connection active". |
The show web connection command displays the privilege level of Web Management Interface users.