Displaying Syslog messages

To display the Syslog messages in the device local buffer, enter the show logging command from any CLI mode. The following shows an example display output.

device# show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 9 overruns)
    Buffer logging: level ACDMEINW, 50 messages logged
    level code: A=alert C=critical D=debugging M=emergency E=error
                I=informational N=notification W=warning

Static Log Buffer:
Jan  1 00:00:56:I:System: Stack unit 1   Power supply 2  is up

Dynamic Log Buffer (50 lines):
Feb  5 01:22:17:D:DHCPC: TFTP unable to download running-configuration
Feb  5 01:22:16:D:DHCPC: sending TFTP request for bootfile name brocade.cfg
Feb  5 01:22:15:D:DHCPC: sending TFTP request for bootfile name icx7450.cfg
Feb  5 01:22:14:D:DHCPC: sending TFTP request for bootfile name ICX7450-24-Route                                                                                                             r.cfg
Feb  5 01:22:13:D:DHCPC: sending TFTP request for bootfile name ICX7450-24-Route                                                                                                             rcc4e.248b.b068.cfg
Feb  5 01:22:12:I:DHCPC: ICX7450-24 Router configured with ip-address 10.10.10.10; subnet mask 255.255.255.0 on port mgmt1
Feb  5 01:22:12:D:DHCPC: sending TFTP request for bootfile name ICX7450-24-Route                                                                                                             rcc4e.248b.b068-config.cfg
Feb  5 01:22:12:I:DHCPC: Setting boot-image download to secondary
Feb  5 01:22:12:E:DHCPC: Failed to configure default gatewa
Feb  5 01:22:12:I:PORT: mgmt1, added ip address 10.10.10.10 by un-authenticate                                                                                                             d user from console session
Feb  5 01:22:12:I:PORT: mgmt1, removed ip address 10.10.10.10 by un-authentica                                                                                                             ted user from console session
Feb  4 01:19:59:D:DHCPC: TFTP unable to download running-configuration
Feb  4 01:19:58:D:DHCPC: sending TFTP request for bootfile name brocade.cfg
Feb  4 01:19:57:D:DHCPC: sending TFTP request for bootfile name icx7450.cfg
...

For information about the Syslog configuration information, time stamps, and dynamic and static buffers, refer to Displaying the Syslog configuration.