Displaying hardware-drop

Use the show ip pim sparse command to display if the hardware-drop feature has been enabled or disabled.

device(config)#show ip pim sparse
Global PIM Sparse Mode Settings
  Maximum Mcache         : 12992       Current Count              : 0
  Hello interval         : 30          Neighbor timeout           : 105
  Join/Prune interval    : 60          Inactivity interval        : 180
  Hardware Drop Enabled  : Yes         Prune Wait Interval        : 3
  Bootstrap Msg interval : 60          Candidate-RP Msg interval  : 60
  Register Suppress Time : 60          Register Probe Time        : 10
  Register Stop Delay    : 10          Register Suppress interval : 60
  SSM Enabled            : Yes         SPT Threshold              : 1
  SSM Group Range        : 232.0.0.0/8
  Route Precedence       : mc-non-default mc-default uc-non-default uc-default