phy cable diagnostics tdr
Runs the VCT TDR test on the specified port.
Syntax
phy cable-diagnostics tdr
stackid/slot/port
Modes
Privileged EXEC mode
Usage Guidelines
Use this command to clear TDR test registers before every TDR cable diagnostic test.
Before executing this command, use the clear cable-diagnostics tdr command to clear any previous TDR test results.
Display diagnostic test results using the show cable-diagnostics tdr stackid/slot/port command.
Examples
The following example clears test registers for the interface and then runs the TDR diagnostic test for port 3 on slot 2 of the first device in the stack.
device# clear cable-diagnostics tdr 1/2/3 device# phy cable-diag tdr 1/2/3
History
| Release version | Command history |
|---|---|
| 08.0.20 | This command was introduced for ICX 6610, ICX 6430, ICX 6430-C, ICX 6450, and ICX6450-C devices. |