show version
Displays version information of stack members
Syntax
show version
Modes
User EXEC mode
Usage Guidelines
Depending on device support, the serial numbers of the pluggable or fixed modules are displayed in the output. The role of the stack unit and its bootup ID are displayed in the last line of command output. No role is displayed for standalone units.
Examples
The following is an example of the output displayed from the show version command, when run on an ICX 7450.
device# show version
Copyright (c) 1996-2016 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Jun 15 2016 at 02:10:23 labeled as SPR08030b1
(31817924 bytes) from Primary SPR08030b1.bin
SW: Version 08.0.30b1T213
Compressed Boot-Monitor Image size = 786944, Version:10.1.06T215 (spz10106)
HW: Stackable ICX7450-24-HPOE
Internal USB: Serial #: 9900614120200136
Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-24P POE 24-port Management Module
Serial #:CYU3350K004
License: ICX7450_L3_SOFT_PACKAGE (LID: eawIIKFmFFJ)
License Compliance: ICX7450-PREM-LIC-SW is Non-Compliant
P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
==========================================================================
UNIT 1: SL 2: ICX7400-4X10GF 4-port 40G Module
Serial #:CYV3338K099
==========================================================================
UNIT 1: SL 3: ICX7400-1X40GQ 1-port 40G Module
Serial #:CYX3350K0B5
==========================================================================
UNIT 1: SL 4: ICX7400-1X40GQ 1-port 40G Module
Serial #:CYX3350K06Y
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 2 minute(s) 35 second(s)
The system : started=warm start reloaded=by "reload"
My stack unit ID = 1, bootup role = alone
*** NOT FOR PRODUCTION ***
ICX7450-24P Router#
The following is an example of the output displayed from the show version command, when a module is removed form the ICX 7450 device.
device# show version
Copyright (c) 1996-2016 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Jun 15 2016 at 02:10:23 labeled as SPR08030b1
(31817924 bytes) from Primary SPR08030b1.bin
SW: Version 08.0.30b1T213
Compressed Boot-Monitor Image size = 786944, Version:10.1.06T215 (spz10106)
HW: Stackable ICX7450-24-HPOE
Internal USB: Serial #: 9900614120200136
Vendor: ATP Electronics, Total size = 1919 MB
==========================================================================
UNIT 1: SL 1: ICX7450-24P POE 24-port Management Module
Serial #:CYU3350K004
License: ICX7450_L3_SOFT_PACKAGE (LID: eawIIKFmFFJ)
License Compliance: ICX7450-PREM-LIC-SW is Non-Compliant
P-ASIC 0: type B548, rev 01 Chip BCM56548_A0
==========================================================================
UNIT 1: SL 3: ICX7400-1X40GQ 1-port 40G Module
Serial #:CYX3350K0B5
==========================================================================
UNIT 1: SL 4: ICX7400-1X40GQ 1-port 40G Module
Serial #:CYX3350K06Y
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
2048 MB DRAM
STACKID 1 system uptime is 3 minute(s) 9 second(s)
The system : started=warm start reloaded=by "reload"
My stack unit ID = 1, bootup role = alone
*** NOT FOR PRODUCTION ***
ICX7450-24P Router#
History
| Release version | Command history |
|---|---|
| 08.0.30j | The output of the show version command is updated when a module is removed form the device. |