If you have an SNMP trap receiver on the network, you can configure Unleashed to send
SNMP trap notifications to the server.
Enable this feature if you want to automatically receive notifications for AP and
client events that indicate possible network issues.
To enable SNMP trap notifications:
Go to Admin & Services > Administer > Network
On the SNMP Trap tab, select the Enable SNMP
Trap check box.
In SNMP Trap format, select either
SNMPv2 or SNMPv3. You can
select only one type of trap receiver. If you select SNMPv2, you only need to
enter the IP addresses of up to four SNMP trap receivers on your network. If you
select SNMPv3, enter up to four trap receiver IP addresses along with
authentication method passphrase and privacy (encryption) settings.
Click Apply to save your changes.