Applying AP CLI Scripts

New AP models and firmware updates are supported without the need to upgrade the controller image by using AP CLI scripts.

  1. Go to Administration > Diagnostics > Scripts.
  2. Select the AP CLI Scripts tab.
  3. From Select AP Zone, choose the AP zone for which you want to apply the script.
  4. Click Browse to select an AP CLI script that you want to upload.
  5. Click Upload.
    The script is listed in the Script Execution Summary section.

    Click Delete to delete scripts.

  6. Click Execute to apply the AP CLI script file to the AP zone.

You have successfully applied AP CLI scripts to the controller AP.