Configuring the router IP address
To configure an IP address to an interface, perform the following steps.
- Click Configure on the left pane and select IP.
- Click Address. The Router IP Address window is displayed.
-
Click
Add IP Address.
The Router IP Address window is displayed as shown in the figure below.
Figure 102 Configuring router IP addresses -
Select a Unit ID from the
Select Unit list and click
Get Ports to retrieve the list of ports corresponding to the selected Unit ID.
A message is displayed to indicate that the operation does not change the running configuration.
-
Select a port in the
Port list.
- stack-unit/slotnum/portnum
- Type the IP address of the device in the IP Address field.
- Type the IP subnet mask in the Subnet Mask field.
- Select the Secondary check box for Type if you have already configured an IP address within the same subnet on the interface.
-
Click
Add.
The message The change has been made is displayed and the specified IP address is assigned to the interface. To display the configured router IP address, click Show.
To delete the configured IP address, click Delete. To reset the data entered in the configuration pane, click Reset.
Parent topic: Configuring IP