Modifying a static station
After you configure a static station, you can modify the port number, QoS priority, VLAN ID, and device type of the entry by performing the following steps.
After you configure a static station, you can modify the port number, QoS priority, VLAN ID, and device type of the entry by performing the following steps.
The Static Station Table window is displayed as shown in the figure below.
The Static Station Table window is displayed as shown in the figure below.
The message The change has been made is displayed and the configured values are reflected in the Static Station window. To display the modified static station, click Show.
To reset the data entered in the configuration pane, click Reset . You can also delete the static station entry by clicking Delete.