Using an ACL to restrict Web management access
To configure an ACL that restricts Web management access to the device, enter commands such as the following.
Brocade(config)#access-list 12 deny host 209.157.22.98 log Brocade(config)#access-list 12 deny 209.157.23.0 0.0.0.255 log Brocade(config)#access-list 12 deny 209.157.24.0/24 log Brocade(config)#access-list 12 permit any Brocade(config)#web access-group 12 Brocade(config)#write memory
Syntax: web access-group num
The num parameter specifies the number of a standard ACL and must be from 1 – 99. These commands configure ACL 12, then apply the ACL as the access list for Web management access. The device denies Web management access from the IP addresses listed in ACL 12 and permits Web management access from all other IP addresses. Without the last ACL entry for permitting all packets, this ACL would deny Web management access from all IP addresses.