Port mirroring and monitoring configuration
To configure port monitoring, first specify the mirror port, then enable monitoring on the monitored port.
The mirror port is the port to which the monitored traffic is copied. Attach your protocol analyzer to the mirror port. The monitored port is the port with the traffic you want to monitor.
The following table lists the number of mirror and monitor ports supported on the Ruckus devices.
Maximum number supported | |
---|---|
Port Type
|
ICX (7450, 7250, 7750) |
Ingress mirror ports | 1 per port region |
Egress mirror ports | 1 per port region |
Ingress monitored ports | No limit |
Egress monitored ports | 8 |
NOTE
You can configure more than eight egress ports, although only the first eight are operational. This is also true for mirrored VLANs - more than eight can be configured, but only the first eight are operational.