Boot code synchronization feature
The Ruckus device supports automatic synchronization of the boot image in the active and redundant management modules. When the new boot image is copied into the active module, it is automatically synchronized with the redundant management module.
NOTE
There is currently no option for manual synchronization of the boot image.To activate the boot synchronization process, enter the following command.
device#copy tftp flash 10.20.65.194 /GA/SXZ07200.bin bootrom
The system responds with the following message.
device#Load to buffer (8192 bytes per dot) ..................Write to boot flash...................... TFTP to Flash Done. device#Synchronizing with standby module... Boot image synchronization done.