Displaying RIPng information

  1. To display RIPng configuration information, enter the show ipv6 rip command at any CLI level. 
    device# show ipv6 rip
IPv6 rip enabled, port 521
      Administrative distance is 120
      Updates every 30 seconds, expire after 180
      Holddown lasts 180 seconds, garbage collect after 120
      Split horizon is on; poison reverse is off
      Default routes are not generated
      Periodic updates 5022, trigger updates 10
      Distribute List, Inbound : Not set
      Distribute List, Outbound : Not set
      Redistribute: CONNECTED
  2. To display the RIPng routing table, enter the following command at any CLI level. 
    device# show ipv6 rip route
IPv6 RIP Routing Table - 4 entries:
ada::1:1:1:2/128, from fe80::224:38ff:fe8f:3000, e 1/3/4 
          RIP, metric 2, tag 0, timers: aging 17 
 2001:db8::/64, from fe80::224:38ff:fe8f:3000, e 1/3/4 
          RIP, metric 3, tag 0, timers: aging 17 
 bebe::1:1:1:4/128, from ::, null   (0)
          CONNECTED, metric 1, tag 0, timers: none
cccc::1:1:1:3/128, from fe80::768e:f8ff:fe94:2da, e 2/1/23 
          RIP, metric 2, tag 0, timers: aging 50
Parent topic: RIPng