Displaying BGP4 neighbor statistics

Various show ip bgp neighbor commands verify information about BGP4 neighbor configurations.

Use one or more of the following commands to verify BGP4 neighbor information. The commands do not have to be entered in this order.
  1. Enter the show ip bgp neighbors command.
    device> show ip bgp neighbors
    
      neighbors              Details on TCP and BGP neighbor connections
        Total number of BGP Neighbors: 1
    1   IP Address: 192.168.1.1, AS: 7701000 (IBGP), RouterID: 192.168.1.1, VRF: default-vrf
        State: ESTABLISHED, Time: 0h3m33s, KeepAliveTime: 60, HoldTime: 180
           KeepAliveTimer Expire in 49 seconds, HoldTimer Expire in 177 seconds
        Minimal Route Advertisement Interval: 0 seconds
           RefreshCapability: Received
        Messages:    Open    Update  KeepAlive Notification Refresh-Req
           Sent    : 1       0       5         0            0
           Received: 1       1       5         0            0
        Last Update Time: NLRI       Withdraw          NLRI       Withdraw
                      Tx: ---        ---           Rx: 0h3m33s    ---
        Last Connection Reset Reason:Unknown
        Notification Sent:     Unspecified
        Notification Received: Unspecified
        Neighbor NLRI Negotiation:
          Peer Negotiated IPV4  unicast  capability
          Peer configured for IPV4 unicast  Routes
        Neighbor AS4 Capability Negotiation:
          Peer Negotiated AS4  capability
          Peer configured for AS4  capability
    		
     As-path attribute count: 1
        Outbound Policy Group:
           ID: 1, Use Count: 1
        TCP Connection state: ESTABLISHED, flags:00000044 (0,0)
         Maximum segment size: 1460
        TTL check: 0, value: 0, rcvd: 64
           Byte Sent:   148, Received: 203
           Local host:  192.168.1.2, Local  Port: 179
           Remote host: 192.168.1.1, Remote Port: 8041
           ISentSeq:    1656867  SendNext:    1657016  TotUnAck:          0
           TotSent:         149  ReTrans:          19  UnAckSeq:    1657016
           IRcvSeq:     1984547  RcvNext:     1984751  SendWnd:       64981
           TotalRcv:        204  DupliRcv:        313  RcvWnd:        65000
           SendQue:           0  RcvQue:            0  CngstWnd:       5840
    
    This example output gives general information about BGP4 neighbors.
  2. Enter the show ip bgp neighbors advertised-routes command.
    device> show ip bgp neighbors 192.168.4.211 advertised-routes
    
           There are 2 routes advertised to neighbor 192.168.4.211
    Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
           E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
           S:SUPPRESSED F:FILTERED s:STALE
           Network        Next Hop       Metric   LocPrf   Weight   Status
    1      10.102.0.0/24  192.168.2.102   12               32768    BL
    2      10.200.1.0/24  192.168.2.102   0                32768    BL
    
    This example shows information about all the routes the BGP4 networking device advertised to the neighbor.
  3. Enter the show ip bgp neighbors command and specify an IP address.
    device> show ip bgp neighbors 10.4.0.2 
    
        Total number of BGP neighbors:
    1   IP Address: 10.4.0.2, AS: 5 (EBGP), RouterID: 10.0.0.1 
           Description: neighbor 10.4.0.2 
        Local AS: 101
        State: ESTABLISHED, Time: 0h1m0s, KeepAliveTime: 0, HoldTime: 0 
           PeerGroup: pg1 
           Multihop-EBGP: yes, ttl: 1 
           RouteReflectorClient: yes 
           SendCommunity: yes 
           NextHopSelf: yes 
           DefaultOriginate: yes (default sent) 
           MaximumPrefixLimit: 90000 
           RemovePrivateAs: : yes 
           RefreshCapability: Received 
        Route Filter Policies: 
           Distribute-list: (out) 20 
           Filter-list: (in) 30 
           Prefix-list: (in) pf1 
           Route-map: (in) setnp1  (out) setnp2 
        Messages:    Open    Update  KeepAlive Notification Refresh-Req 
           Sent    : 1       1       1         0            0 
           Received: 1       8       1         0            0 
        Last Update Time: NLRI       Withdraw          NLRI       Withdraw 
                      Tx: 0h0m59s    ---           Rx: 0h0m59s    --- 
        Last Connection Reset Reason:Unknown 
          Notification Sent:     Unspecified 
          Notification Received: Unspecified 
        TCP Connection state: ESTABLISHED 
           Local host:  10.4.0.1, Local  Port: 179 
           Remote host: 10.4.0.2, Remote Port: 8053 
           ISentSeq:   52837276  SendNext:   52837392  TotUnAck:          0 
           TotSent:         116  ReTrans:           0  UnAckSeq:   52837392 
           IRcvSeq:  2155052043  RcvNext:  2155052536  SendWnd:       16384 
           TotalRcv:        493  DupliRcv:          0  RcvWnd:        16384 
           SendQue:           0  RcvQue:            0  CngstWnd:       1460
    
    This example shows information about a specifies BGP4 neighbor.
  4. Enter the show ip bgp neighbors received-routes command.
    device> show ip bgp neighbor 10.168.4.106 received-routes
    
           There are 97345 received routes from  neighbor 10.168.4.106
    Searching for matching routes, use ^C to quit...
    tatus A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
           E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTEREDtatus A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
           E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
           Prefix             Next Hop        MED     LocPrf    Weight Status
    1      10.3.0.0/8          10.168.4.106           100       0      BE
             AS_PATH: 65001 4355 701 8
    2      10.4.0.0/8          10.168.4.106           100       0      BE
             AS_PATH: 65001 4355 1
    3      10.60.212.0/22      10.168.4.106           100       0      BE
             AS_PATH: 65001 4355 701 1 189
    4      10.6.0.0/8          10.168.4.106           100       0      BE
    
    This example lists all route information received in route updates from BGP4 neighbors of the device since the soft-reconfiguration feature was enabled.
  5. Enter the show ip bgp neighbors rib-out-routes command.
    device> show ip bgp neighbor 192.168.4.211 rib-out-routes 192.168.1.0/24
    
    Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
           E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
           S:SUPPRESSED F:FILTERED s:STALE
           Prefix             Next Hop        Metric     LocPrf     Weight Status
    1      10.200.1.0/24       0.0.0.0         0          101        32768  BL
    
    This example shows information about BGP4 outbound RIB routes.