The weight that the device adds to received routes can be specified. The following task changes the weight from the default for routes that are received from a specified BGP4+ neighbor.
-
Enter the
configure terminal command to access global configuration mode.
device# configure terminal
-
Enter the
router bgp command to enable BGP routing.
device(config)# router bgp
-
Enter the
local-as command to configure the autonomous system number (ASN) in which your device resides.
device(config-bgp-router)# local-as 65520
-
Enter the
address-family ipv6 unicast command to enter address family IPv6 unicast configuration mode.
device(config-bgp-router)# address-family ipv6 unicast
-
Enter the
neighbor weight command and specify an
ipv6 address and a weight value to specify a weight that the device adds to routes that are received from the specified BGP4+ neighbor.
The following example specifies a weight of 200 that the device adds to routes that are received from the specified BGP4+ neighbor.
device# configure terminal
device(config)# router bgp
device(config-bgp-router)# local-as 65520
device(config-bgp-router)# address-family ipv6 unicast
device(config-bgp-ipv6u)# neighbor 2001:db8:e0ff:783a::4 weight 200
