One global tag profile with a number between 0 and 0xffff can be configured on stackable devices.
On individual ports, if tag-profile
is enabled, it points to the global tag profile.
Tag-profile
can also be enabled for provisional ports.
Tag-type
and tag-profile
cannot be configured at the same time. You will see the message "un-configure the tag-type to set the tag-profile." It tag-type
is already configured, you will need to unconfigure it and then add the tag-profile
.
Do not use the tag-type
command in conjunction with the tag-profile
command. If a tag-type
has already been configured and you try to use the tag-profile
command, you will see an error message telling you to remove the tag-type before you add the tag-profile.
For devices operating in an IronStack topology, when a tag-type for a port is changed, the tag-type for all of the ports on a stack unit also changes. Because of this limitation, SAV and Q-in-Q cannot be used at the same time on stacking devices.
