Verifying Auto Image Copy
Use the
show stack detail command to check for any units in the mismatch state after the stack is formed. The following example shows that stack unit 2 is not operational, due to an image mismatch.
T=1h10m1.8: alone: standalone, D: dynamic cfg, S: static ID Type Role Mac Address Pri State Comment 1 S ICX7750-20QXG active 748e.f8f9.6300 0 local Ready 2 S ICX7750-20QXG member cc4e.2438.7280 0 remote NON-OP: image mismatch 3 S ICX7750-20QXG standby cc4e.2438.7500 0 remote Ready active standby +---+ +---+ +---+ =2/1| 1 |2/4==2/1| 3 |2/4--2/1| 2 |2/4= | +---+ +---+ +---+ | | | |-------------------------------------