Enabling digital optical monitoring

To enable optical monitoring on all Ruckus-qualified optics installed in the device, use the following command.

device(config)#optical-monitor

To enable optical monitoring on a specific port, use the following command.

device(config)#interface ethernet 1/1/1
device(config-if-e10000-1/1/1)#optical-monitor

To enable optical monitoring on a range of ports, use the following command.

device(config)#interface ethernet 1/1/1 to 1/1/2
device(config-mif-e10000-1/1/1-1/1/2)#optical-monitor

Syntax: [no] optical-monitor

Use the no form of the command to disable digital optical monitoring.